Lab Design Laminates

DP042 Sand Storm

Finish Satin Gloss

Sample ordering only - Specify your sample size in the cart.

Lab Designs High Pressure Laminates

Nominal Sheet Dimensions:

4' x 8' (48 1/4" x 96 1/4")

.9mm postforming grade

Finish Applications:

Vertical

Horizontal

Finish:

Satin

Gloss

*Colors and scale displayed may vary from actual product depending on the equipment and software on which images are viewed and printed. Please request a product sample prior to specifying.

****

See the laminate world in High Resolution Digital with Lab Designs first digital laminate collection! They are extremely high resolution digital designs printed on the first PALIS 2250 machine in the world. These designs have an unprecedented sharpness of 1200 dpi, which provide a lifelike picture. The inks used have the highest international standard of six on the blue wool light fastness scale which prevents fading even after years of use. This revolutionary new process allows Lab Designs to offer custom images to be printed on high pressure laminate.

1. Please handle with care, the product is thin.
2. Please remove from box/crate and let acclimate for 5-7 days before using.
3. After opening pallet or box lay laminate flat and put a heavy substrate on top to keep it from warping. Some warping can be extreme.
4. Never fabricate or store product under 60 degrees or above 90 degrees.
5. Leave your A/C or heater on at all times.
6. Never deliver finished product to a non- temperature controlled environment.
7. Never apply to dry wall without using substrate.

View full details

Important Info

Care and Maintenance

download

Technical Data and Specifications

download

Follow these suggestions for best results:

1. Please handle with care, the product is thin.
2. Please remove from box/crate and let acclimate for 5-7 days before using.
3. After opening pallet or box lay laminate flat and put a heavy substrate on top to keep it from warping. Some warping can be extreme.
4. Never fabricate or store product under 60 degrees or above 90 degrees.
5. Leave your A/C or heater on at all times.
6. Never deliver finished product to a non- temperature controlled environment.
7. Never apply to dry wall without using substrate.