Collection: LeNaturale

The laminates in this collection are .8mm thick instead of our standard postform grade. There are instructions for special care on these Continuous Pressure Laminates (slightly different from our HPL's) listed on the bottom of this page and on every individual laminate page for this collection. Please call Lab Designs directly at 336.429.4114 with questions or concerns. We are always happy to help.

*Sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed and printed. Please view an actual product sample prior to specifying.

*Not all laminates are available in all finishes.

LeNaturale Laminate Instructions

Le Naturale is a Continuous Pressed Laminate (Not a High Pressure Laminate). Use normal high pressure laminate fabricator techniques when using this product and follow the instructions below.

Please handle with care, the product is thin.
Please remove from box/crate and let acclimate for 5-7 days before using.
After opening pallet or box lay laminate flat and put a heavy substrate on top to keep it from warping. Some warping can be extreme.
Never fabricate or store product under 60 degrees or above 90 degrees.
Leave your A/C or heater on at all times.
Never deliver finished product to a non- temperature controlled environment.
This product must always be balanced with a brown 0.6mm thick phenolic backer. High Pressure Laminate, Cabinet Liner, Paint, Melamine, Paper Back or Raw Back do not count as balanced.
Substrate must be MDF or Particle Board (nothing else)
Never use this product horizontally or in a high traffic area.
Never apply to dry wall without using substrate.
*** PLEASE NOTE**** For pre and post application/installation, do not use any
adhesive tape on the laminate face/color/pattern side.